NFC_commands,_event,_dynamic_variable.md

+1) Enable, Disable, Reset the NFC
+```
+$PFAL,SYS.NFC.Enable=Serial0
+$PFAL,SYS.NFC.Disable
+$PFAL,SYS.NFC.Reset
+```
+2) Controlling the LED's (green, red, white) on the NFC reader
+
+```
+(Green LED)
+$PFAL,SYS.NFC.LED1,high
+$PFAL,SYS.NFC.LED1,lpulse,1000
+$PFAL,SYS.NFC.LED1,Low
+$PFAL,SYS.NFC.LED1,hpulse,1000
+$PFAL,SYS.NFC.LED1,cyclic,1000,1000
+
+(Red LED)
+$PFAL,SYS.NFC.LED2,high
+$PFAL,SYS.NFC.LED2,lpulse,1000
+$PFAL,SYS.NFC.LED2,Low
+$PFAL,SYS.NFC.LED2,hpulse,1000
+$PFAL,SYS.NFC.LED2,cyclic,1000,1000
+
+(White LED)
+$PFAL,SYS.NFC.LED3,high
+$PFAL,SYS.NFC.LED3,lpulse,1000
+$PFAL,SYS.NFC.LED3,Low
+$PFAL,SYS.NFC.LED3,hpulse,1000
+$PFAL,SYS.NFC.LED3,cyclic,1000,1000
+```
+3) Event when detecting a card
+```
+SYS.NFC.eCARD
+```
+4) Dynamic entry (variable)
+```
+&(NFCUID)
+```
+Example as PFAL-Alarm
+```
+$PFAL,CNF.Set,AL1=SYS.NFC.eCARD:msg.send.serial1,0,"testNFC &(NFCUID)"
+```
\ No newline at end of file