NFC_commands,_event,_dynamic_variable

This is an old version of this page. You can view the most recent version or browse the history.

Enable, Disable, Reset the NFC

$PFAL,SYS.NFC.Enable=Serial0
$PFAL,SYS.NFC.Disable
$PFAL,SYS.NFC.Reset

Controlling the LED's (green, red, white) on the NFC reader

(Green LED)
$PFAL,SYS.NFC.LED1,high
$PFAL,SYS.NFC.LED1,lpulse,1000
$PFAL,SYS.NFC.LED1,Low
$PFAL,SYS.NFC.LED1,hpulse,1000
$PFAL,SYS.NFC.LED1,cyclic,1000,1000

(Red LED)
$PFAL,SYS.NFC.LED2,high
$PFAL,SYS.NFC.LED2,lpulse,1000
$PFAL,SYS.NFC.LED2,Low
$PFAL,SYS.NFC.LED2,hpulse,1000
$PFAL,SYS.NFC.LED2,cyclic,1000,1000

(White LED)
$PFAL,SYS.NFC.LED3,high
$PFAL,SYS.NFC.LED3,lpulse,1000
$PFAL,SYS.NFC.LED3,Low
$PFAL,SYS.NFC.LED3,hpulse,1000
$PFAL,SYS.NFC.LED3,cyclic,1000,1000

Event when detecting a card

SYS.NFC.eCARD

Dynamic entry (variable)

&(NFCUID)

Example as PFAL-Alarm

$PFAL,CNF.Set,AL1=SYS.NFC.eCARD:msg.send.serial1,0,"testNFC &(NFCUID)"