wiki_wifi_sniffing.md

@@ -21,6 +21,18 @@ This HW based on a Chipsatz: Ralink RT5572 and is Dual Freq. 2.4 and 5 GHz as we
 To setup and configure the WiFi HW driver, Linux Network Subsystem as well as Wireshark with all needed parameter we provide [here](uploads/9e42a63a7c00ffa051a42f1f82beaedd/ltrx_wifi_sniffer.sh) a Script to setup all automatic.
 
 ## Test Setup
+Please try to setup like shown below:
+*  setup AP's and DUT with WPA2-PSK CCMP/CCMP security with same key
+*  Both AP's were configured with 50ms beacon intervals
+*  Both AP's and the DUT are setup on same channel and same bandwidth (20MHz)
+*  Try to isolate as much as possible from other WiFi networks of RF noise - best by located all inside a isolation chamber
+*  Roaming settings were:
+  *  Scan Interval: 8 seconds
+  *  RSSI Delta (2.4 GHz): 9 dBm (may not applicable in this testing.)
+  *  RSSI Delta (5 GHz): 8 dBm
+  *  Roam Threshold (2.4 GHz): -50 dBm (may not applicable in this testing.)
+  *  Roam Threshold (5 GHz): -50 dBm
+*  setup diagram
 ![TestSetup](uploads/64a40e4878101f23abed42a541941e0b/TestSetup.png)
 
 ## generate data traffic