wiki_setup_premium_feature.md

 # How to setup a Premium Feature
+1) check which feature is already enabled 
+```
+$PFAL,msg.feature
+
+IndexedHistory: active (never expires)
+AES_TCP: inactive
+EcoDrive: active (never expires)
+Can: active (never expires)
+RS485: active (never expires)
+MSC: active (never expires)
+eCall: inactive
+ExtGeofence: active (never expires)
+ExtAlarms: active (never expires)
+SUCCESS
+```
+
+2) check ProductID
+```
+$PFAL,MSG.Version.Complete
+
+Hardware: FOX3-3G
+HardwareRev: 08-NUCH
+HardwareOptions: [Highspeed-CAN] [BAT] [MOTION] [AUDIO] [UBLOX]
+Software: avl_2.16.0
+SoftwareID: STEPPIII_QUAD_GPRS ( YXZsXzIuMTYuMF9yYzE1 )
+Production ID: 6014440827600073
+ProductionCode: 0x7D 00 0F
+BIOS: 2.2
+GSM: SW:LISA-U201 ( TElTQS1VMjAxIDIzLjQx )
+GPS: UBLOX SW:1.00 (59842), HW:00070000
+SUCCESS
+```
+3) request (via email) the Feature for your Production ID
+
+4) you will get back a Secured PFAL like
+```
+//code for productID : 6014440827600073 IMEI 359486060286208
+$PFAL,msg.feature="31,85,31,37,06,14,AC,8E,D4,58,43,39,D7,D7,89,A8,2D,F3,22,44,5C,7E,8E,81,F2,C1,E5,60,6C,AB,90,24"
+```
+
+5) execute the PFAL via Workbench or OTA via REST on the device
+
+6) check if new feature is enabled 
+```
+$PFAL,msg.feature
+
+IndexedHistory: active (never expires)
+AES_TCP: active (never expires)
+EcoDrive: active (never expires)
+Can: active (never expires)
+RS485: active (never expires)
+MSC: active (never expires)
+eCall: inactive
+ExtGeofence: active (never expires)
+ExtAlarms: active (never expires)
+SUCCESS
+```
 
-1. check ProductID
\ No newline at end of file