ROCKY Asset Tracking Wiki Main Page

LED

• [RED LED]
• [GREEN LED]
• [YELLOW LED]

Button

• [POWER]
• [CHECK]

SENSOR

• [TEMPERATURE]
• [HUMIDITY]
• [ACCELERATION]
• [GYRO]
• [MAGNETIC]
• [PREASURE]
• [LIGHT]
• [GNSS]
• [BLE]
• [CELLLOCATE]
• [BATTERY]

CHARGE

• [Wireless Qi Charge]

How to Use

1. charge the ROCKY wireless with a QI charger
2. switch on device by press Power Button 1 sec.

• red LED show CPU activity
• green LED show GNSS state (blink= acquire, on = fix)
• yellow LED show Network state (blink= attaching/search, on = TCP connected)

How to Setup

1. login into your D2Sphere Account
2. go to "Operate" select your Device ID/IMEI
3. double click the device Row
4. select "console" Menu
5. type in bottom left text filed $pfal,cnf.show
6. press ENTER
7. see in left Text Console the current setup
8. change the values by type $pfal,cnf.set,<Value>

How to Re- Configure

1. login into your D2Sphere Account
2. go to "Operate" select your Device ID/IMEI
3. double click the device Row
4. select "console" Menu
5. here you can send Commands to the device id the devices is connected to the server

• please check if device is connected (green dot in console view on name or yellow LED on device is on)
• you can force reconnect to press "check" button (red LED should start blinking after 5-10 sec.)

6. when connected you can typ in console (type in bottom left text filed $pfal,cnf.show )

DEVICE.NAME=DEMO_ROCK
DEVICE.INTERVAL=600,43020,300 ... executing
DEVICE.NAME=DEMO_ROCK
DEVICE.INTERVAL=600,43020,300
MSG.ALIVE=<sfal.event text='State Batt:&(vbat) Temp:&(vtemp) Humi:&(vhumi) Net:&(opname)/&(lac)/&(cellid)'>
MSG.CHECK=<sfal.event text='Check Batt:&(vbat) Temp:&(vtemp) Humi:&(vhumi) Net:&(opname)/&(lac)/&(cellid)'>
MSG.VALUES=<sfal.pos _batt='&(svbat)' _temp='&(svtemp)' _humi='&(svhumi)' _accl='[&(svaccx),&(svaccy),&(svaccz)]'>
NET.URL=stage.d2sphere.com:4444
SUCCESS

7. you can change name by send CMD $PFAL,CNF.SET,DEVICE.NAME=DEMO_ROCK
8. you can change measure interval or data sampling interval wiht CMD $PFAL,CNF.SET,DEVICE.INTERVAL=600,43020,300 where DEVICE.INTERVAL=<data sample interval>,<tcp connect interval>,<connect timeout / gnss timeout> (all values in sec)
9. EXAMPLES:

• sample data all 3 min and sent all 1h to server (wait 3min to get GNSS fix and stay 3min TCP connected) $PFAL,CNF.SET,DEVICE.INTERVAL=180,3420,180
• sample data all 10 min and sent all 12h to server (wait 5min to get GNSS fix and stay 5min TCP connected) $PFAL,CNF.SET,DEVICE.INTERVAL=600,42900,300

How to Read Data

1. login into your D2Sphere Account
2. go to "Operate" select your Device ID/IMEI
3. double click the device Row
4. select data Menu
5. to see historical Data Graph click on the Key you want to see

Other References

• ROCKY PFAL SPEC

D2Sphere

• D2Sphere Main Wiki
• D2Sphere REST API Swagger SPec.