rocky_pub_wiki_main.md

@@ -47,6 +47,40 @@
 7. see in left Text Console the current setup
 8. change the values by type "$pfal,cnf.set,<Value>"
 
+## How to Re- Configure
+1. login into your D2Sphere Account 
+2. go to "Operate" select your Device ID/IMEI
+3. double click the device Row 
+4. select "console" Menu
+5. here you can send Commands to the device id the devices is connected to the server
+  - please check if device is connected (green dot in console view on name or yellow LED on device is on)
+  - you can force reconnect to press "check" button (red LED should start blinking after 5-10 sec.)
+6. when connected you can typ in console (type in bottom left text filed "$pfal,cnf.show" )
+
+```pfal
+DEVICE.NAME=DEMO_ROCK
+DEVICE.INTERVAL=600,43020,300 ... executing
+DEVICE.NAME=DEMO_ROCK
+DEVICE.INTERVAL=600,43020,300
+MSG.ALIVE=<sfal.event text='State Batt:&(vbat) Temp:&(vtemp) Humi:&(vhumi) Net:&(opname)/&(lac)/&(cellid)'>
+MSG.CHECK=<sfal.event text='Check Batt:&(vbat) Temp:&(vtemp) Humi:&(vhumi) Net:&(opname)/&(lac)/&(cellid)'>
+MSG.VALUES=<sfal.pos _batt='&(svbat)' _temp='&(svtemp)' _humi='&(svhumi)' _accl='[&(svaccx),&(svaccy),&(svaccz)]'>
+NET.URL=stage.d2sphere.com:4444
+SUCCESS
+```
+
+7. you can change name by send CMD '$PFAL,CNF.SET,DEVICE.NAME=DEMO_ROCK'
+8. you can change measure interval or data sampling interval wiht CMD 
+'$PFAL,CNF.SET,DEVICE.INTERVAL=600,43020,300'
+where 
+DEVICE.INTERVAL=<data sample interval>,<tcp connect interval>,<connect timeout / gnss timeout>
+(all values in sec)
+9. EXAMPLES:
+  - sample data all 3 min and sent all 1h to server (wait 3min to get GNSS fix and stay 3min TCP connected)
+'$PFAL,CNF.SET,DEVICE.INTERVAL=180,3420,180'
+  - sample data all 10 min and sent all 12h to server (wait 5min to get GNSS fix and stay 5min TCP connected)
+'$PFAL,CNF.SET,DEVICE.INTERVAL=600,42900,300'
+
 ## How to Read Data
 
 1. login into your D2Sphere Account