Skip to content

GitLab

Last edited by Guido Voigt
Page history
This is an old version of this page. You can view the most recent version or browse the history.

avl_time_state

D2Sphere and Device Time Managment

AVL Time State


sequenceDiagram
    participant SystemTime
    participant LastValidPosition 
    participant RTC 
    participant GNSS 
    participant UserTime
    
    LastValidPosition ->> SystemTime: load last valid time and timestamp not older then build date
    RTC ->> SystemTime: load RTC time if time valid flag and timestamp not older then build date
    GNSS ->> SystemTime: load GNSS time if time and date valid and timestamp not older then build date
    GNSS ->> RTC: set RTC time if time and date valid and timestamp not older then build date
    UserTime ->> SystemTime: set Time via $PFAL,Sys.SetTime,dd.mm.yy,hh:mm:ss
    UserTime ->> RTC: set Time via $PFAL,Sys.SetTime,dd.mm.yy,hh:mm:ss
    SystemTime ->> LastValidPosition: save last Valid pos and time $PFAL,GPS.Nav.SaveLastValid

D2Sphere Response to 'non' correct time in Login Field

AVL Time State

$PFAL:ID1,Sys.SetTime,06.07.2020,09:40:19;GPS.Nav.SaveLastValid
  • GPS.Nav.SaveLastValid is only sent to store on AVL the given time as default startup time
  • Sys.SetTime,06.07.2020,09:40:19 need to be parsed and used as time in UTC for any further data sent to D2Sphere