HowTo use REST/JSON

simple send position data

PFAL command example

TCP.JSON.Flush,"http://testserver.com/json",0,":{\'LAT\':&(LastLat),\'LON\':&(LastLon),\'IMEI\':&(IMEI),\'IGN\':&(IO8)}"

HTTP POST

TBD

REST specific PFAL commands

• command to sent HTTP REST with URL encodiong TCP.Send.Rest,"",,""

  • : http:// must be included!; optional :<port_number> is possible
  • : 0 - no encryption is used
  • : url-encoded key1=val1&key2=val2&..&key=val

• command to sent HTTP REST with JSON body

TCP.Send.JSON,"<URL>",<enableBodyEncryption>,"<Parameter-String>"

• : http:// must be included!; optional :<port_number> is possible
• : 0 - no encryption is used
• : have to start with { and end with } key names have to enclosed by escaped character ' between key and value the character : is required values: strings have to enclosed by escaped character ' fractional numbers with . as separator

• new dynamic entry &(HttpResponse) - reports the last responded HTTP status message/error code

• write command for Multi parameter JSON

TCP.JSON.Write,"<Parameter-String>"

write single data line to flash buffer for unsent msg, each with leading marker

• flush command for Multi parameter JSON

TCP.JSON.Flush,"<URL>",<enableBodyEncryption>,"<Parameter-String>"

send unsent data as MultiMsg JSON : JSON with additional marker as placeholder for stored single data lines {,}