Skip to content

GitLab

avl_frp_main · Changes

Page history
Update avl_frp_main authored by Guido Voigt's avatar Guido Voigt
Show whitespace changes
Inline Side-by-side
Showing with 24 additions and 6 deletions
avl_frp_main.md
View page @ cbc46d50
......@@ -4,9 +4,7 @@
FRP is a file with a file ending *.frp which contains all needed binary and instruction to update a FALCOM AVL device. A *.frp file is basically a ZIP container with a given structure.
The main idea is to have all needed files in one container - to prevent any mix of files which may not tested in this combination.
## Content of FRP
### version 1.0 of FRP
## version 1.0 of FRP
```
*.frp
|
......@@ -52,7 +50,7 @@ The main idea is to have all needed files in one container - to prevent any mix
* after reset check successfull update via `$pfal,msg.version.complete`
### version 2.0 of FRP (DRAFT)
## version 2.0 of FRP (DRAFT)
```
*.frp
|
......@@ -94,9 +92,29 @@ The main idea is to have all needed files in one container - to prevent any mix
</devices>
</falcom-resource-package>
```
#### update process
* unpack *.frp into local temp folder
* parse content.xml
* check device via `$pfal,msg.version.complete`
* compare device class,type, major from current device with data from XML
* if fit move on if not stop process here
* if defined a '<pre>' in configuration sent `$pfal,Sys.Device.CfgUpdateMode` to enter optimized device config update mode - if not skip next 2 points
* update each pfal in any xxxxx_yyy.pre.conf one by one (timeout ~30sec. retry 3)
* when all `$pfal` settings successfull transmitted sent `$pfal,Cnf.Backup` this will optimize the stored config
and create a backup of the current configuration
* check crc of *.bin
* update *.bin via pfal in given mode (when compress is used compress before transmit)
* check all packages transmit with ok
* finalize update via pfal
* device will reset
* after reset check successfull update via `$pfal,msg.version.complete`
* if defined a '<post>' in configuration sent `$pfal,Sys.Device.CfgUpdateMode` to enter optimized device config update mode - if not skip next 3 points
* update each pfal in any xxxxx_yyy.pre.conf one by one (timeout ~30sec. retry 3)
* when all `$pfal` settings successfull transmitted sent `$pfal,Cnf.Backup` this will optimize the stored config
and create a backup of the current configuration
* recommended to sent a `$pfal.sys.device.reset`
### version 3.0 of FRP (PLANNED DRAFT)
## version 3.0 of FRP (PLANNED DRAFT)
```
*.frp
|
......