avl_frp_main.md

@@ -50,7 +50,7 @@ The main idea is to have all needed files in one container - to prevent any mix
 * after reset check successfull update via `$pfal,msg.version.complete`
 
 
-## version 3.0 of FRP (DRAFT)
+## version 3.0 of FRP (deprecated)
 ```
 *.frp
 |
@@ -92,29 +92,6 @@ The main idea is to have all needed files in one container - to prevent any mix
 	</devices>
 </falcom-resource-package>
 ```
-#### update process
-* unpack *.frp into local temp folder
-* parse content.xml
-* check device via `$pfal,msg.version.complete`
-* compare device class,type, major from current device with data from XML
-* if fit move on if not stop process here
-* if defined a `<pre>` in configuration sent `$pfal,Sys.Device.CfgUpdateMode` to enter optimized device config update mode - if not skip next 2 points
-* update each pfal in any xxxxx_yyy.pre.conf one by one (timeout ~30sec. retry 3)
-* when all `$pfal` settings successfull transmitted sent `$pfal,Cnf.Backup`  this will optimize the stored config
-and create a backup of the current configuration 
-* check crc of *.bin
-* update *.bin via pfal in given mode (when compress is used compress before transmit)
-* check all packages transmit with ok 
-* finalize update via pfal
-* device will reset
-* after reset check successfull update via `$pfal,msg.version.complete`
-* if defined a `<post>` in configuration sent `$pfal,Sys.Device.CfgUpdateMode` to enter optimized device config update mode - if not skip next 3 points
-* update each pfal in any xxxxx_yyy.pre.conf one by one (timeout ~30sec. retry 3)
-* when all `$pfal` settings successfull transmitted sent `$pfal,Cnf.Backup`  this will optimize the stored config
-and create a backup of the current configuration 
-* recommended to sent a `$pfal.sys.device.reset`
-* please note the "crc" for configuration is optional
-
 ## version 4.0 of FRP (DRAFT 1)
 #### example of frp file content
 ```
@@ -177,3 +154,27 @@ Raw file with following options:
 	</devices>
 </falcom-resource-package>
 ```
+
+
+# general update process
+* unpack *.frp into local temp folder
+* parse content.xml
+* check device via `$pfal,msg.version.complete`
+* compare device class,type, major from current device with data from XML
+* if fit move on if not stop process here
+* if defined a `<pre>` in configuration sent `$pfal,Sys.Device.CfgUpdateMode` to enter optimized device config update mode - if not skip next 2 points
+* update each pfal in any xxxxx_yyy.pre.conf one by one (timeout ~30sec. retry 3)
+* when all `$pfal` settings successfull transmitted sent `$pfal,Cnf.Backup`  this will optimize the stored config
+and create a backup of the current configuration 
+* check crc of *.bin
+* update *.bin via pfal in given mode (when compress is used compress before transmit)
+* check all packages transmit with ok 
+* finalize update via pfal
+* device will reset
+* after reset check successfull update via `$pfal,msg.version.complete`
+* if defined a `<post>` in configuration sent `$pfal,Sys.Device.CfgUpdateMode` to enter optimized device config update mode - if not skip next 3 points
+* update each pfal in any xxxxx_yyy.pre.conf one by one (timeout ~30sec. retry 3)
+* when all `$pfal` settings successfull transmitted sent `$pfal,Cnf.Backup`  this will optimize the stored config
+and create a backup of the current configuration 
+* recommended to sent a `$pfal.sys.device.reset`
+* please note the "crc" / "sha512" for configuration is optional
\ No newline at end of file